From the author’s doctoral dissertation (Nissen, 2025), Figure 4.3, p. 84
Designed and built a platform to integrate an existing custom laser-ultrasonic detection system. Machined extruded aluminum, fabricated platform, integrating kinematic couplings so that platform could be moved between systems on a repeatable basis.
Material shown here is limited to content from my dissertation. Additional CAD models and fabrication drawings cannot be shared publicly due to project confidentiality restrictions.
Troubleshot, redesigned and rebuilt high voltage wiring system to support selective laser flash sintering (SLFS) system.
Designed laser safety system with curtain and interlock for Class IV laser system.
Designed and 3D printed alignment platform for transitioning samples between SLFS and ultrasonic laser systems.
I developed the design concept and created most of the CAD for a passive hearing-aid prototype. The design combined a sound-collecting horn with three internal channels of different lengths feeding a common outlet toward the ear, exploring whether geometry could shape the frequency response without electronic amplification.
I designed the geometry for SLA printing, considering thin-wall printability, overhangs, surface finish, and internal channel layout. The longer-term goal was an inexpensive design that could be customized to an individual’s hearing-loss pattern.
FDM and SLA prototypes were produced, and my teammates conducted the acoustic testing. The SLA prototypes increased microphone response at some tested frequencies, but residual resin in the channels complicated evaluation of the intended channel-selective response. The project remained a proof of concept and did not include human testing.
Additional Team Members: Kaya Bayazitoglu, Matthew Cassoli, Colton Meeks
Our six-person team built and tested a motor-driven precision lathe. The team designed the spindle, spindle housing, and flexures, worked through bearing-fit and assembly revisions, performed runout testing, and demonstrated the completed lathe cutting aluminum.
My hands-on contributions included operating the lathe and mill, reaming, building a go/no-go gauge for testing, and helping build the spindle and spindle housing. I also assisted with the press-fit assembly of the spindle, bearings, and housing.
Additionally, I was responsible for the project Gantt chart, parts ordering and budget tracking, and photo and video documentation of the build.
Additional Team Members: Matthew Cassoli, Michael Fogg, Saideep Vollala, James Wang, Tyler Watts
Watch the Lathe Spinning (motor sound is high-pitched, beware)
Designed and built two iterations of a low-cost Raman spectrometer for detecting contaminants in water and air: first a laser-cut enclosure with a halogen source, then a light-tight 3D-printed enclosure housing a 520 nm green laser, a diffraction grating, a sealed Raspberry Pi NoIR camera, and a closed sample jar in the beam path.
Identified and explored machine-learning classification using Python and PyTorch as part of the prototype sensor project. The exploratory work did not produce a working classifier before the final undergraduate semester was interrupted by COVID-19.
Designed and built apparatus for testing low cost filter media for agricultural runoff. Experiments were designed to allow farmers to purchase low cost "off the shelf" materials,in hopes of preventing fertilizer runoff into local rivers and streams.
Designed and built a micro-scale wave-powered robotics prototype, reverse-engineering the
wave-propulsion concept of the Suntory Mermaid II, as an early step toward a remotely placed
environmental sensor platform.
Additional Team Members: Ryan Benner, Alexandria Trevino
During the COVID-19 pandemic I worked on a volunteer design team on an open-source face shield adapted for people with cochlear implants. An over-the-top strap removed the conflict with the ear, but it had no natural sizing. I sketched a baseball-cap style clasp for the adjustment, and that approach was carried into the released design. My contributions were hand drawings, as I did not have access to a CAD program at that time.
Separately, I batch printed roughly 800 standard face shields and 500 mask savers on two Ender 3 printers running around the clock at home, and delivered them to local hospitals and nursing homes.
I was lead author for the funded proposal for a King Creativity Grant at Southwestern University, "Engaging Elementary Students in Physics" ($1,000), and created and tracked the project budget. In February 2020 I organized and ran the resulting Physics Fair for elementary students at the Georgetown Public Library in Georgetown, Texas.
Christina Nissen, Audrey Colegrove, Jon Smart
I assembled and modified an Ender 3 Pro with a dual-Z kit, a replacement hot end, new bed-leveling nuts, 3D-printed extruder handles, and an OctoPi camera system, for use in printing numerous personal projects in my home lab.
Additionally, I have performed my own maintenance and repairs on my vehicles, from small cars to diesel trucks. I have used OBD-II scanners to find troubleshooting codes, and performed repairs - including but not limited to tires, filters, fluids, MAF sensors, belts, and full brake rotor, pad and shoe replacements.
I also do my own home repairs and installations, including drywall, painting, cabinets, ceiling fans, appliances, switches, outlets, and plumbing fixtures. I am comfortable troubleshooting almost any problem.
A list of tools I have used for home repairs (but not limited to):
- Cutting: miter, circular, rip, hack, reciprocating, jig, and table saws.
- Drilling and fastening: drills, hammer drills, and nail guns.
- Finishing and other equipment: sanders, rotary tools, heat guns, and air compressors.
- Multi-meter and voltage tester
- Numerous hand tools